1. What special considerations are not performed before drilling a well?

   A) Carry out pressure waveform from a 0.82 kg SUS charge detonated.
   B) Observe more stringent environmental requirements (i.e, drilling in an environmentally sensitive area).
   C) Severe environment report (High Pressure High temperature (HPHT), deepwater, high hydrogen Sulphide).
   D) Physical constraints (e.g, pipelines, proximity of other installations) seasonal access restrictions.

2. What instrument is used to measure drilling fluid Weight?

   A) LTLP filter press
   B) Mud Balance
   C) HTHP filter press
   D) API Extreme Pressure Tester.

3. Which of the following are permits needed before drilling commences (select all that apply)?

   A) Chemical Discharge Records (DTI or agent)
   B) Loss of Fluid Test Programme (OECD)
   C) Incident reporting (DTI/HSE)
   D) All of the above.
   E) None of the above.

4. Which of the following personnel should not be on site during drilling?

   A) Drilling Superintendent
   B) Derrick Manager
   C) Driller Supervisor
   D) Rig Inspector

5. Which of these requirements exist during the operational phase of drilling?

   A) Conclusion of Rig work (HSE)
   B) Rig move notification
   C) Rig Emissions Cost
   D) Drill fluid Discharge Records (DTI or agent)

6. Which of the following is constituent of Mud?

   A) Oil Based Mud (OBM)
   B) Water Based Mud (WBM)
   C) Gas, aerated muds
   D) All of the above

7. The time required to plan and execute a well construction programme is dependent on (select all that apply)?

   A) sub-surface complexity
   B) location
   C) type of well
   D) All of the above.
   E) None of the above.

1. What is a Kick during drilling?

   A) Inflow of Drilling fluid into the annals
   B) Inflow of formation fluid into the wellbore
   C)Outflow of Drilling fluid into the annals
   D) Outflow of formation fluid into the wellbore

2. The full meaning of MAASP is Maximum Atomize Allowable Surface Pressure?

   A)True
   B) False.

3. A Kick can be composed of what fluids (check all that apply)?

   A) Salt water
   B) Gas
   C) Oil
   D) Drilling Fluid
   E) Combination of all of the above

4. What is lag time of cuttings during drilling?

   A) Surface to reservoir and reservoir to surface.
   B) Annual to bit and bit to surface.
   C) Annual to bit and bit to Annual.
   D) Surface to bit and bit to surface.

5. During drilling what is drilling breaks?

   A) When drilling personnel change drill strings
   B) Evidence of transition to an abnormal zone.
   C) Evidence of hydrocarbon.
   D) Evidence of transition to a normal zone

6. What can cause a Kick during drilling (list all that apply)?

   A) Insufficient Salt water.
   B) Not keeping the hole full.
   C) Loss of circulation.
   D) Circulation of Drilling Fluid.
   E) Swabbing.

7. What is the effect of Swabbing on connection/trip gas?

   A) It creates negative differential pressure
   B) It creates posative differential pressure.

8. Which of these method is used to manage a Kick?

   A) Derrickman's method.
   B) Driller’s method.

9. Surface Well Control Equipment is made of?

   A) Bits.
   B) Blow out preventers
   C) Casing head.
   D) Drilling Fluid.
   E) Drilling Spool.

Completion Quiz coming soon